
Degree/Certificate |
Institution |
Passing Year |
Doctor of Philosophy, Ph.D. in EEE |
Islamic University of Technology (IUT), OIC, Bangladesh |
2019 |
Master of Science in Electrical and Electronic Engineering |
Islamic University of Technology (IUT), OIC, Bangladesh |
2011 |
Bachelor of Science in Electrical and Electronic Engineering |
Ahsanullah University of Science and Technology, Dhaka, Bangladesh |
2008 |
Higher Secondary Certificate (HSC) |
S.O.S. Hermann Gmeiner College, Dhaka |
2003 |
Secondary School Certificate (SSC) |
Adamjee Cantonment Public School, Dhaka |
2001 |
Designation |
Organization |
Experience Period |
Associate Professor, Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
17 January 2020- till date |
Program Coordinator Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
1 January 2020- 15 October 2021 |
Assistant Professor, Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
20 December 2014- 16 January 2020 |
Program Coordinator Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
17 January 2016- 30 December 2017 |
Chairperson (acting) Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
1 September 2015- 16 January 2016 |
Senior Lecturer, Department of EEE |
Green University of Bangladesh (GUB), Dhaka, Bangladesh |
14 August 2013- 19 December 2014 |
Lecturer, Department of EEE |
Prime University (PU), Mirpur, Dhaka, Bangladesh |
20 October 2011- 13 August 2013 |
Lecturer (part-time) Department of EEE |
Ahsanullah University of Science and Technology (AUST), Dhaka, Bangladesh |
October 2008- September 2011 |
Journal Publications:
[1] Ahmed Al Mansur, Md Ruhul Amin, Mohammad Asif ul Haq, Md Hasan Maruf, Md Mozaharul Mottalib, Ratil H. Ashique, and A. S. M. Shihavuddin. “Mitigation of mismatch power loss in aged photovoltaic arrays following a comparative investigation into module rearrangement techniques.” Energy Reports Elsevier (2022). (IF – 7.37)
[2] Ahmed Al Mansur, Md Imamul Islam, Mohammad Kamrozzaman Kiron, Mohammad Asif ul Haq, Md Hasan Maruf, A. S. M. Shihavuddin, Ratil Hasnat Ashique, and Md Ruhul Amin. “Electrical experimental data collection of polycrystalline and monocrystalline photovoltaic modules in an indoor environment using artificial sun simulator.” Data in brief 43, Elsevier (2022): 108389.
[3] Md Hasan Maruf, Mamun Rabbani, Ratil H Ashique, Md Tariqul Islam, Murad Kabir Nipun, Mohammad Asif Ul Haq, Ahmed Al Mansur, ASM Shihavuddin “Exergy based evaluation of power plants for sustainability and economic performance identification,” Case Studies in Thermal Engineering, Elsevier, Vol -28, Jan 2021. (IF – 4.724)
[4] Nusrat Jahan, Md Aliur Rahman, Mohammad Golam Mohiuddin, Ahmed Al Mansur, Ahsan Habib, Md Shamim Mondol, “Impact of Covid-19 Pandemic on Study: Assessing Reading Habits of University Students in Bangladesh”, International Journal of Social, Political and Economic Research, Vol-8, Issue-2, pages-327-340, Oct 2021.
[5] ASM Shihavuddin, Mohammad Rifat Ahmmad Rashid, Md Hasan Maruf, Muhammad Abul Hasan, Mohammad Asif ul Haq, Ratil H Ashique, Ahmed Al Mansur, “Image based surface damage detection of renewable energy installations using a unified deep learning approach”, Energy Reports, Elsevier, Vol -7, Nov 2021. (IF – 7.37)
[6] Maruf, M.H.; Haq, M.A.; Dey S.K.; Ahmed Al Mansur; Shihavuddin, A.; “Adaptation for sustainable implementation of Smart Grid in developing countries like Bangladesh,” Energy Reports, Elsevier, Vol -6, Nov 2020. (IF – 7.37)
[7] Haq, M.A.; Islam, A.; Shihavuddin, A.; Maruf, M.H.; Ahmed Al Mansur, A.; Hassan, M.Y. “Enhanced Energy Savings in Indoor Environments with Effective Daylight Utilization and Area Segregation.” Symmetry 2020. (IF – 2.51)
[8] Ahmed Al Mansur, Ruhul Amin, K. Islam, “Performance Comparison of Mismatch Power Loss Minimization Techniques in Series-Parallel PV Array Configurations” -Energies 2019. (IF – 3.0)
[9] Ahmed Al Mansur, Mohammad Asif Ul Haq, Md. Hasan Maruf, ASM Shihavuddin, Md. Ruhul Amin, and Kazi Khairul Islam, “Experimental Investigation of PV Array Interconnection Topologies at Nonuniform Aging Condition for Power Maximization”, GUBJSE, Vol 7, Issue 1, December 2019.
[10] Md. Al- Amin Hasan Turkiye, Md. Maruf Islam Bapari, Md. Faruk Hossin, Md. Nahid Sazzad, Ahmed Al Mansur, and Md. Fayzur Rahman, “Design and Implementation of a Multiple Load Controlling Device Using Voice Command Sensor”, GUB JOURNAL OF SCIENCE AND ENGINEERING, Volume 05, Issue 01, 2018.
[11] Md. Nahid Sazzad, Md. Jowel Rana, Md. Anowar Hossain, Ahmed Al Mansur, and Md. Fayzur Rahman, “Design and Implementation of a Digital Distance Measurement Meter Using Ultrasound Sensor”, GUB JOURNAL OF SCIENCE AND ENGINEERING, Volume 04, Issue 01, 2017.
[12] Md. Nazmul Alam, Ahmed Al Mansur, Md. Hasan Maruf and Md. Fayzur Rahman “Analysis and Implementation of Automatic Controlling System for Water Purification” –Green University Journal of Science and Engineering, Bangladesh, Volume 2, Issue 2, January 2016.
[13] Ahmed Al Mansur, Md. Hasan Maruf, Md. Atiqul Islam, Kazi Khairul Islam “Hardware Implementation of LCD Message Display Based on Cellular Communication” – American Journal of Engineering Research (AJER), Volume-5, Issue-7, pp-262-268, July 2016.
[14] Ahmed Al Mansur, Biplob Shil, Muhibul Haque Bhuyan, “Design and Development of PC Based Elevator Control Systems via ATmega32 Microcontroller”-Southeast University Journal of Science and Engineering (SEUJSE), Volume 10, No.1-2, June 2016.
[15] Sikder Mohammad Faruk, Mir Mofajjal Hossain, Ahmed Al Mansur and Muhibul Bhuyan, “Improvement of Input Side Current of a Three-Phase Cúk Rectifier” –Southeast University Journal of Science and Engineering (SEUJSE), Volume 9, No.1-2, December 2015.
[16] Ahmed Al Mansur, Faisal Ahamed, Abdullah Al Murad, Ayesha Yeasmin, Kazi Khairul Islam “Comparative Analysis of Power Factor Improvement of a Three Phase Boost Rectifier” –Green University Journal of Science and Engineering, Bangladesh, Volume 2, Issue 1, January 2015.
[17] Ahmed Al Mansur, Biplob Shil, Kazi Khairul Islam, Md Ashraful Hoque, Muhibul Haque Bhuyan “Design and Implementation of a Solar Radiation Meter using PV panel as a Sensor” –Green University Journal, Bangladesh, Volume 1, Number 1, July 2014.
[18] Ahmed Al Mansur, Kazi Khairul Islam, “Combined Constant Voltage and Perturb and Observe Method Based Algorithm for Fast and Efficient Maximum Power Point Tracking Using Buck-Boost Converter” Green University Journal, Volume 4, Number 1-2, December 2013.
[19] Ahmed Al Mansur, Abdullah Al Bashit, Muhammad Rafiqul Islam, “Harmonic Analysis of Front-End Current of Three-Phase Single-Switch Boost Converter” –International Journal of Applied Information Systems (IJAIS) – ISSN: 2249-0868, New York, USA, Volume 5– No.4, March 2013.
[20] Ahmed Al Mansur, Abdullah Al Bashit, Mahfuzur Rahman, Shahinur Alam,Hasina Begum, “Improvement of Input-Side Current of a Single Phase Rectifier with Variable Output Voltage Range using Boost Converter and Investigation of Harmonic Minimization”– IJSER, ISSN : 2229-5518, Volume 4, Issue3, 2013.
[21] Sadeque Reza Khan, Ahmed Al Mansur, Muhammad Towhidur Rahman, “Design and Implementation of RF Deployed SMS Based Equipment Controller” – IJCA, USA, Volume 37– No.5, January 2012.
[22] Sadeque Reza Khan, Ahmed Al Mansur, S.M. Ferdous, “Implementation of a Controller Unit for an Intelligent Ventilation System (IVS) for a BTS room” –International Journal of Computer Applications (ISSN 0975-8887), Volume 37– No.5, January 2012.
[23] Muhammad Towhidur Rahman, Mohammad Rokonuzzaman, M. Abdullah Al-Amin, Ahmed Al Mansur, Md. Khairul Alam, “An Approach Towards Establishing Novel Photovoltaic Solar Cell Simulator” – Third International Joint Journal in Computer, Electronics and Electrical, 2012.
[24] Sadeque Reza Khan, Ahmed Al Mansur, Alvir Kabir, Shahid Jaman, Nahian Chowdhury, “Design and Implementation of Low Cost Home Security System using GSM Network” – International Journal of Scientific & Engineering Research Volume 3, Issue 3, March –2012.
[25] Sadeque Reza Khan, Ahmed Al Mansur, Alvir Kabir, Md. Modasshir, Ahmed Al Marouf “Design of Data Acquisition System Implemented with a Free Cooling Unit (FCU) Controller For a BTS Room” – International Journal of Scientific & Engineering Research, Volume 3, Issue 2, February-2012.
Conference Paper Publications:
[26] Ahmed Al Mansur, S.M. Ferdous, Zubaeer Bin Shams, Mohammad Rokonuzzaman, Md. Ashraful Hoque, “An Experimental Investigation of the Real Time Electrical Characteristics of a PV Panel for Different Atmospheric Conditions in Islamic University of Technology (OIC), Gazipur, Bangladesh”, IEEE, International Conference and Utility Exhibition, 28-30 September 2011, AIT, Pattaya City, Thailand, Ref. No: S 06.3.
[27] Ahmed Al Mansur, S.M. Ferdous, Mohammad Rokonuzzaman, Muhammad Towhidur Rahman, Md. Ashraful Hoque, “Design and Simulation of an Integrated Constant Voltage Based Perturb & Observe Algorithm for Rapid MPPT Detection of a Photovoltaic Panel Using Buck-Boost Converter“ XIII International Conference on Electrical Machines, Drives and Power Systems, ELMA 2011, 21-22 October 2011, Varna, Bulgaria, p.227-233, ISSN-1313 4965.
[28] Tausif Ali, Ahmed Al Mansur, Zubaeer Bin Shams, S.M. Ferdous, Md. Ashraful Hoque, “An Overview of Smart Grid Technology in Bangladesh: Development and Opportunities”, IEEE, International Conference and Utility Exhibition, 28-30 September 2011, AIT, Pattaya City, Thailand, Ref. No: S 02.2.
[29] Muhammad Towhidur Rahman, Ahmed Al Mansur, Nahyan Al Mahmud, Mahmoodul Islam, Taskin Jamal, “Development of Electrical Behavioral Model of an Arbitrary Solar Cell to Amend the PSPICE Simulation Performance”, IEEE, International Conference and Utility Exhibition, 28-30 September 2011.
[30] S.M.Ferdous, Taslim Reza, Md. Nayeemul Hasan, Ahmed Al Mansur, Kazi Firoz Ahmed, A.Z.M.Shahriar Muttalib, “A Surface Electromyogram (sEMG) Signal Guided Control System of an Automated Wheel Chair for Disabled Using Neck Muscel Movements”, XIII International Conference on Electrical Machines, Drives and Power Systems, ELMA 2011, Varna, Bulgaria, p.109-114, 21-22 October 2011.
[31] Muhibul Bhuyan , Ahmed Al Mansur, Sikder Md. Faruk, Mir Mofajjal Hossain, “Investigation of Total Harmonic Distortion of a three phase cuk rectifier”-5th International Conference on Informatics, Electronics and Vision, IEEE Conference, ICIEV 2016.
[32] Ahmed Al Mansur, Md Ruhul Amin, Kazi Khairul Islam, “Comparative Analysis of Mismatch Power Loss Reduction Techniques for Photovoltaic Series Parallel Array Configurations”- IAPE ’19, Oxford, United Kingdom ISBN: 978-1-912532-05-6, March, 2019.
[33] Ahmed Al Mansur, Ruhul Amin, Kazi Khairul Islam “Determination of Module Rearrangement Techniques for Non-uniformly Aged PV Arrays with SP, TCT, BL and HC Configurations for Maximum Power Output”- IEEE, International Conference on Electrical, Computer and Communication Engineering (ECCE), 7-9 Feb. 2019
[34] Ahmed Al Mansur, and Ruhul Amin “Performance Investigation of Different PV Array Configurations at Partial Shading Condition for Maximum Power Output”, – IEEE, International Conference on Sustainable Technologies for Industry 4.0 (STI), 24-25 December, 2019.
[35] Ratil H Ashique, Mohammad Monirujjaman Khan, ASM Shihavuddin, Md Hasan Maruf, Ahmed Al Mansur, Mohammad Asif ul Haq, “A Novel Family of Class EFnm and E/Fnm Inverter for Improved Efficiency”, – IEEE, International Conference on Sustainable Technologies for Industry 4.0 (STI), 1-6 December, 2020.
[36] Ahmed Al Mansur, Md Imamul Islam, Mohammad Asif ul Haq, Md Hasan Maruf, ASM Shihavuddin, Md Ruhul Amin, “Investigation of PV Modules Electrical Characteristics for Laboratory Experiments using Halogen Solar Simulator”, – IEEE, International Conference on Sustainable Technologies for Industry 4.0 (STI), December, 2020.
Patents:
[1] Ahmed Al Mansur, Md. Imamul Islam, Md. Imamul Islam, Mohammad Asif Ul Haq, Md. Hasan Maruf, ASM Shihavuddin, Md Ruhul Amin, Artificial Sun Simulator – Patent No. 244 of 2020, Department of Patent, Design and Trademarks, Dhaka, Bangladesh (filed).
AWARDS AND SCHOLARSHIPS:
§ Awarded OIC SCHOLARSHIP in Post Graduate Program. (2009-2011)
§ Awarded UNIVERSITY SCHOLARSHIP in Undergraduate Program. (2004-2007)
§ Awarded Government Welfare Association SCHOLARSHIP in Secondary and Higher Secondary School Levels. (1999-2003)
BANGLADESH GOVERNMENT-FUNDED RESEARCH:
Funded Projects |
Status |
Funded by |
BDT |
Year/ duration |
Maximization of Solar Array Output Power using Module Rearrangement Techniques (PI). |
Done |
ICT Division |
10,00,000 |
2020-2021 |
Feasibility study of multi-sector adaptation of artificial sun simulator (PI). |
Done |
R&D, MOST |
1,00,000 |
2020-2021 |
Power Loss Reduction in Large Solar Photovoltaic System using Genetic Algorithm Based Panel Arrangement (PI). |
Done |
MOST Special allocation |
2,00,000 |
2021-2022 |
Performance comparison of two different vertical axis wind turbines for output power maximization of a 100W wind generator (PI). |
Done |
R&D, MOST |
80,000 |
2021-2022 |
Social Issues in the Juma Sermon: Dhaka City in Perspective (Co-PI). |
Ongoing |
SSRC, MOP |
10,00,000 |
2021-2022 |
GREEN UNIVERSITY-FUNDED RESEARCH:
Funded Projects |
Status |
BDT |
Year/ duration |
Design and Implementation of Maximum Power Point Tracking (MPPT) Converter for Photovoltaic System (PI). |
Done |
40,000 |
2017 |
Investigation of photovoltaic electrical characteristics using artificial solar simulator at indoor test condition (PI). |
Done |
40,000 |
2018 |
Experimental Investigation on Minimization of I-V Mismatch Power Losses in Non-Uniformly Aged Photovoltaic Array Modules (PI). |
Done |
40,000 |
2018 |
Performance Investigation of Different Configurations on Non-uniformly Aged Photovoltaic Array for Maximum Output Power (PI). |
Done |
45,000 |
2019 |
A Novel Interconnection Topology for PV Array Modules to minimize the Power Loss due to Partial Shading Conditions (PI). |
Done |
25,000 |
2020 |
Structural damage detection on power plants using drone-based inspection and automated analysis (Co-PI). |
Done |
80,000 |
2020 |
POSTGRADUATE Research:
Ph.D. THESIS
Topic: “Mismatch Power losses Minimization in Photovoltaic Array”
Area: Renewable Energy Systems
Supervisor: Dr. Md. Ruhul Amin, Professor, EEE, Islamic University of Technology (IUT), Gazipur, Dhaka, Bangladesh
M. Sc. THESIS
Topic: “Design and Simulation of Maximum Power Point Tracking using Power Electronics Converter for Mini-Grid Photovoltaic System”
Area: Power Electronics and Renewable Energy Systems
Supervisor: Dr. Md. Ashraful Haque, Professor, EEE, Islamic University of Technology (IUT).
UNDERGRADUATE Research:
B. Sc. THESIS
Topic: “Improvement of Input Side Current of a Three Phase Boost Converter using Active Switching and Passive Filtering”
Area: Power Electronics
Supervisor: Dr. Jahangir Alam, Professor, EEE, BUET, Bangladesh.
ACADEMIC ACHIEVEMENTS:
§ Worked on developing the Electrical Machine Laboratory of Prime University (2011-2012).
§ Worked on developing the Power Electronics Laboratory at Green University (2017-2019).
§ Currently developing the Renewable Energy Laboratory (REL) and Experimental Setup at Green University of Bangladesh (2018-2022).
EXTRACURRICULAR ACTIVITIES:
§ Member of the champion team in Inter Department Football competition in AUST.
§ Attained and won several prizes in Inter School Athletic competitions.
§ Organized several gaming contests in School and College.
§ Member of the organizing committee of Bangladesh Physics Olympiad 2013.
PROFESSIONAL AFFILIATION:
§ Senior Member: IEEE since 2021
§ Member (M/27793): Institute of Engineers Bangladesh (IEB)
§ Member (93938000): IEEE since 2018
§ Student Member (85003963): IEEE AUST student branch (2004-2007)
TEACHER TRAINING EXPERIENCES:
Focused Area |
Organization Name |
Duration |
The Art of Questioning and Grading of Students Performance for Ensuring Effective Teaching and Learning |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
14 August 2013 |
Teaching & Learning at GUB: Step Towards Quality and Excellence |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
2 – 5 September 2013 (4 days) |
Learner-Centered Syllabus Writing |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
7 September 2013 |
Strengthening Presentation Skills |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
21 September 2013 |
Research Proposal Writing |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
25 November 2013 |
Teaching-Learning, Curriculum & Quality Assurance |
Graduate Training Institute (GTI), Bangladesh Agriculture University Mymensingh (BAUM) |
13- 17 March, 2016 (5 days)
|
Guidelines for Self-Assessment at Program Level |
QA Unit, UGC and GUB |
16 June 2016 |
Workshop on Sampling Data Collection and Analysis |
Institutional Quality Assurance Cell (IQAC), GUB |
22 October 2016 |
Standard Curriculum Format: Implication for Departments of GUB |
Institutional Quality Assurance Cell (IQAC), GUB |
14 February 2017 |
Data Management, SA report writing & Post Self-Assessment Improvement Plan |
Institutional Quality Assurance Cell (IQAC), GUB |
15 May 2017 |
Organizational Performance at GUB: Exploring the Role of Values and Culture |
Green University Center of Excellence for Teaching and Learning (GUCETL) |
22 May 2017 |
PROFESSIONAL TRAINING EXPERIENCES:
Focused Area |
Organization Name |
Duration |
Programming of PLC for Inductrial Automation and Maintenance. |
Engineering Staff College, Dhaka, Bangladseh. |
4 – 29 October 2009 (26 days) |
Embedded System Design and Development |
Institute of Information and Communication Technology (IICT), BUET |
6– 11 February 2013 (5 days) |
Advanced Embedded System Design and Development |
Institute of Information and Communication Technology (IICT), BUET |
8 – 9 March, 2013 (2 days) |
Emerging Technologies for 5G Cellular Communication |
Department of EEE, Islamic University of Technology (IUT), Dhaka, Bangladesh |
14- 17 November, 2016 (4 days) |
Third Generation Flexible AC Transmission Systems (FACTS) – Dynamic Modeling and Simulation |
Department of EEE, Islamic University of Technology (IUT), Dhaka, Bangladesh |
25- 28 December, 2017 (4 days) |
PLC Applications Present State-of-the-Art |
Department of EEE, Islamic University of Technology (IUT), Dhaka, Bangladesh |
26- 29 November, 2018 (4 days) |
Statistical Package for the Social Science (SPSS) |
Center for Research Innovation and Transformation (CRiT), GUB, Bangladesh |
07 March 2018 to 06 April 2018 (30 days) |
SUPERVISION OF UNDER-GRADUATE THESIS:
2022
§ Experimental Investigation of Solar Panel Characteristics under different Aging Conditions
§ Effect of Dust on Photovoltaic Array Output Power in the Dry Environment in Bangladesh
§ The prospect of photovoltaic energy in Chattogram, Bangladesh
§ The prospect of Photovoltaic energy in Bangladesh
§ Power Maximization in PV array using Different configurations.
§ Hybrid Power system using Wind and PV system
§ Power Loss minimization in Aged PV array
§ Experimental Investigation of Shading Effect on Different PV Array Configurations for Maximum Power Output
2021
§ Mismatch Power Loss Minimization Techniques For Series Parallel Photovoltaic Array
§ Internship on Detection of Fall & Repairing System of Mobile Phone at Walton
§ Design and Implementation of a MPPT Charge Controller for Photovoltaic System
§ Performance Comparison of Photovoltaic Array Configurations During Non-uniform Shading
§ Analysis of Dust Effects on Output Characteristics of Photovoltaic Array Modules
§ Design and implementation of a microcontroller based photovoltaic Inverter System
§ Investigation of PV performance under dust conditions at different locations in Bangladesh
§ Implementation of a 100w vertical wind generator
§ Experimental Investigation of Electrical Characteristics of a PV Array power Generator
§ Development of Artificial Sun Simulator using Light and Temperature Sensor in the Measuring Unit
§ Study of Smart Grid and Implementation Electric Vehicle’s in Bangladesh.
2020
§ Mismatch Power Loss Minimization in Photovoltaic Array using Module Rearrangement Techniques.
§ Power Maximization in Large PV Array by Minimizing Mismatch losses.
§ Photovoltaic Module Testing System Using Indoor Solar Simulator.
§ Power Maximization in Photovoltaic Array Using Different Array Configuration.
2019
§ Experimental Investigation of Shading Effect on Different PV Array Configurations for Maximum Power.
§ Performance Investigation of Different PV Array Configurations at Shading Due to Moving Cloud.
§ Improvement of Input Side Current of a Three Phase Rectifier: A Comparison using ĆUK and SEPIC Converter.
§ Experimental Analysis of Shading Effect in Photovoltaic Array Configurations.
§ Mismatch Power Loss Analysis for Aged Photovoltaic Array Configurations.
§ Performance Comparison of Photovoltaic Array Configurations During Non-Uniform Shading.
2018
§ Minimization of Mismatch power losses in photovoltaic array using SP and TCT.
§ Investigation of Mismatch Power Loss Minimization in Photovoltaic Array.
§ Experimental Analysis of Shading Effect on PV Array for Different Array Configuration.
§ Experimental Investigation of Power Maximization in Aged Photovoltaic Array.
§ Experimental Investigation of Shading Effect on Different PV Array Configurations for Maximum Power Output.
§ Mismatch Power Loss Minimization Techniques for Series Parallel Photovoltaic Array.
2017
Study and Analysis of Mismatch Power Losses in High Power PV Array using Genetic Algorithm.
Photovoltaic Array Power Maximization using Genetic Algorithm.
Analysis and Development of Maximum Power Point Tracking using Boost Converter.
Analysis and Development of Maximum Power Point Tracking using Buck Converter.
2016
Study of Maximum Power Point Tracking Algorithms for Photovoltaic System.
Electrical Power Mismatch of Mono Crystalline Photovoltaic Panels.
Electrical Power Mismatch of Poly Crystalline Photovoltaic Panels.
Analysis of Photovoltaic Panel Power Loss Due to Shading Effect and Soiling.
Experimental Analysis of Electrical Characteristics of a Monocrystalline Solar Panel.
2015
§ Design and Simulation of Photovoltaic Panel using MATLAB Simulink.
§ Study of maximum power point algorithms for photovoltaic pumping technology.
§ Design and Analysis of High Frequency Inverter for Aircraft Power System.
§ Study on Renewable Energy as a Sustainable Alternative for Ensuring Energy and its Potential in Bangladesh.
§ Design and implementation of an automatic water pumping system for garden.
2014
§ Solar powered water pumping technology: a study for small-scale irrigation system in Bangladesh.
§ Design and Development of PC Based Elevator Control Systems via Microcontroller ATmega32 for Control System Laboratory.
§ Design and Implementation of a Wireless Electronic Notice Board using GSM.
2013
§ Design and Implementation of Sun Simulator for Experimental Analysis of Solar System.
§ Generalized Model Development for Maximum Power Point Tracking of Photovoltaic Systems Using Different Types of DC-DC Converters.
2012
Improvement of Input Side Current of a Single-Phase Rectifier Using EMI and Investigation of Harmonic Minimization.
Power Factor Improvement of a Three Phase Boost Converter Using Passive Filter.
SUPERVISION OF UNDER-GRADUATE PROJECT:
§ Design and Implementation of a MPPT Charge Controller for Photovoltaic System, 2021.
§ Implementation of Digital Distance Meter using Ultrasound and Laser Light, 2020.
§ Implementation of load controlling Device using Voice Command, 2019.
§ Implementation of Electrical Characteristics Measuring unit for 10Watt PV Panel, 2018.
Three Phase Line Protection of an Induction Motor by using Three Magnetic Relay, 2017.
Electrical Protection System for Under and Over Voltage, 2016.
Industrial Automatic Water Purification and Controlling System, 2016.
§ Design and Implementation of an Automatic Load Controlling System using Mobile Phone,2015.
§ Hardware Implementation of a Variable DC power Supply, 2015.
§ Implementation of Load Controlling System using Bluetooth Device, 2015.
§ Remote Controlled Home Appliance Powered by Photovoltaic Energy, 2015.
§ Design and implementation of a DC power bank for mobile phone, 2014.
Design and implementation of a universal mobile phone charger, 2014.
Design and Implementation of an Automatic Solar Street Lighting System, 2013.
§ Implementation of a 100 watts push-pull Inverter, 2013.
Implementation of a Solar Rechargeable Table Lamp and Cell Phone Charger, 2012.
Design and Implementation of a Standalone Photovoltaic Charge Controller, 2012.
An Experimental Analysis of the Electrical Characteristics of a Photovoltaic Panel, 2012.
Design and Implementation of a Solar Powered Mobile Phone Charger, 2011.
SUPERVISION OF UNDER-GRADUATE INTERNSHIP:
§ PLC based automation in pharmaceutical medicine production machine,2020.
§ Manufacturing Process of 400kVA Distribution Transformer, 2019.
§ Electric Power Generation by Generator and Protection System, 2018.
§ Power Generation Process and Troubleshooting of Gas Generator, 2017.
§ Prospect and Potential of Biogas Energy in Bangladesh, 2016.
§ Analysis of the Electrical Equipment of an indoor type sub-station, 2015.