Labs

Labs
Electrical Circuits Laboratory

Here students verify different electrical circuit and network theorems e.g., KCL, KVL, mesh, node, thevenin’s, maximum power transfer, superposition theorems etc.

Lab Apparatus

  • Oscilloscopes
  • DC and AC power supplies
  • Lamp boards
  • Ammeters
  • Voltmeters
  • Clamp-on meters
  • Variable rheostat
  • Resistors
  • Inductor bank
  • Capacitor bank
  • Switches
  • Variacs etc.
Analog Electronics Laboratory

Students are engaged in doing experiments on study of semiconductor device characteristics, voltage regulator circuit, rectifier circuit; adder, integrator and differentiator circuit using linear op-amp IC, minority carrier life-time measurement of LDR and LED. Besides, students develop' projects on CE/CC amplifier, power amplifier and communication circuits such as Amplitude and Frequency Modulation and Demodulation circuit, PLL circuit etc.

Lab Apparatus

  • Analog trainer boards
  • Oscilloscopes
  • Function generators
  • DC power sources
  • Multimeter
  • LCR meters
  • Resistors, capacitors, inductors, VRs
  • Diode
  • Transistor, MOSFET
  • Analog ICs etc.
Digital Electronics Laboratory:

This laboratory is furnished with state-of-the art laboratory equipment. Students do laboratory experiments on designing combinational and sequential circuits. Students build-up projects on digital control circuits, digital voltmeter, digital timer etc.

Lab Apparatus

  • Digital trainer board
  • Oscilloscopes
  • Logic probe
  • IC tester
  • IC extractor
  • DC power sources
  • Multimeter
  • Diode
  • Wide ranges of digital ICs of TTL and CMOS series etc.
Industrial Electronics Laboratory

In this laboratory, students mainly do experiments on study of device characteristics.

Lab Apparatus

MOSFET, SCR, TRIAC, DIAC, UJT, PUT. PSPICE and MATLAB software packages to simulate various types of power electronics circuits e.g. inverter, buck and boost regulator, chopper driven circuits etc.

Microprocessor and Interfacing Laboratory

This laboratory is enriched with 8086 microprocessor trainer kit, Pentium IV microcomputer, memory and interface ICs and devices. Students do project on microprocessor and pc based dc motor and stepper motor controls, control of different electrical appliances through relay, display different patterns on LED, seven-segment display and dot-matrix display.

Lab Apparatus

  • 8086 microprocessor trainer kit
  • Pentium IV microcomputer
  • Memory and interface ICs and devices
  • DC motor and stepper motor controls
  • Relay
  • Seven-segment display and dot-matrix display
Electrical Machine Laboratory

Students mainly do experiments on finding the machine characteristics and various parameter values. Besides, there are few highly configured personal computers for simulation works of electrical machines.

Lab Apparatus

  • Wound rotor slip-ring Induction motor
  • Synchronous machine
  • DC compound motor
  • Single phase induction motor
  • Three phase induction motor
  • Clamp on meter
  • Multimeter
  • Electric blower
  • Transformers
  • Rheostat, single and three phase voltage regulators
  • Tachometer
  • Lamp board etc.
Power system protection and Switchgear Laboratory

The laboratory enables students to demonstrate the principle of power transmission using a model transmission line, electric loads connection such as inductive loads, capacitor banks and resistors to preview their effect on a power system. In addition this laboratory is equipped with facilities that cover all power system protection related topics and achieve experimental verification of principles and practice of protective relaying.

Measurement and Instrumentation Laboratory

This laboratory is equipped with various types of test and measurement instruments. Students design and implement experiments on differential and instrumentation amplifier, universal voltmeter, power and energy measurement techniques.

  • Lab Apparatus
  • Galvanometer
  • Ammeter
  • Voltmeter
  • Wattmeter
  • Energy meter
  • Solar panel
  • Different types of transducer etc.
Control Systems Laboratory

At present, students are using ‘Control System Toolbox’ of MATLAB to study the modeling of the open loop and close loop control systems, to find the step response to a system of different orders and types, to design analog and digital control systems using root locus method and PID controller, to find frequency responses using lag/lead compensator, to find the error co-efficient of a system for different type of input signals etc. This laboratory has also been furnished with state-of-the-art Programmable Logic Controller (PLC) of LJ Technical Systems, UK. Using this equipment, students learn about the drawing of relay ladder logic diagram, rung programming and also do experiments on how to run a conveyer belt and how to program the PLC from the PC and download the program to the PLC and control various devices using the PLC.

Digital Signal Processing Laboratory

This laboratory is developed using the DSP training kit of Texas Instrument’s TMS320Cxx. At present, students are doing experiments using ‘Signal Processing Toolbox’ of MATLAB. They are doing experiments on sample sequence generation, noise cancellation of an image, study of FIR and IIR filters, power spectrum analysis, .wav file processing etc. This laboratory also is furnished with the equipment from the TIMS, Australia.

VLSI Laboratory

The Department of EEE has one computer laboratory equipped with twenty five (25) PCs with latest configuration as well as latest version of various simulation tools for VLSI circuit design, such as, PSPICE, Microwind, DSCH and verilog HDL. In this laboratory, students learn how to design and simulate CMOS VLSI circuits of various basic digital logic gates. They are also taught basics of PSPICE programming and also they build few small projects.

Data Communication and Computer Networks Laboratory

In this laboratory, we have PCs connected in a LAN for sixty students. Students are doing experiments on AM, FM, PCM, QPSK, ASK, FSK, GMSK, BER calculation, TDM, TDMA, CDMA etc. using ‘Communication Toolbox’ of MATLAB.

Lab Apparatus

  • Windows 2000 Professional Servers
  • NIC
  • Crimpers
  • Twisted pair cables
  • RJ45 connectors
  • Router
  • Switches
  • Hubs etc.
Telecommunication Engineering Laboratory

This laboratory has been set-up by the experimental kits from TIMS, Australia, LJ Technicals, UK, D’Lorenzo, Itali and Flacon, India. In this laboratory, students can do experiments on PC based tunable LPF, phase shifter, signal multiplier, convolution code encoder/decoder, delta modulation/demodulation, PCM, signal transmission through optical fiber, signal attenuation in optical fiber, use of telephone set, caller ID identification, working principle of telephone exchange etc. Besides, they do a few experiments using MATLAB and its communication toolbox.

Microwave Engineering Laboratory

This laboratory is functioning with microwave communication trainers from LJ Technical, UK. In this laboratory, students do experiments on how microwave signals are transmitted and received by the different types of antenna, and how it is propagated through free space and waveguide and reflected from the passive body like metallic plates, grills etc.

Computer Laboratory

The Department of EEE has one computer laboratory equipped with twenty five (25) PCs with latest configuration and programming, graphics and database software as well as latest version of various simulation tools. In the programming courses, students are taught basics of computer programming languages and also they build small course projects. Besides, this laboratory is used for various simulation experiments, such as, control systems, digital signal processing, electronics etc.

Physics Laboratory

This laboratory is well equiped with various types of apparatus that include.

  • Calorimeters
  • Post office box
  • Meter bridge
  • Potentiometer
  • Polarimeter
  • Compound pendulum
  • Stop watch
  • Microscope
  • Sonometer
  • Water heater
  • Calorimeter
  • Optical bench
  • Traveling microscope
  • Resistance boxes (ranging from 0.1W to 10,000W)
  • Rheostates of various ranges
  • Slide calipers
  • Screw gauges
  • Spherometer
  • Capillary tubes
  • Searle’s apparatus
  • Galvanometers etc.
Chemistry Laboratory

This laboratory is well equipped with various types of apparatus. Various types of chemicals are used to do experiments on volumetric and gravimetric analyses, general systematic organic and inorganic salts analyses, p-H metric and potentiometric titration etc.

Lab Apparatus

  • Analytical balance
  • Burretes and pipetts
  • Conical flask
  • Volumetric flask
  • pH-conductance-TDS meter
  • DO and COD meter
  • Distilled water plant
  • Suction pumps
  • Chemical equipment and chemical reagents etc.